Afrormosia (Pericopsis Elata) Veneered On Hardwood Plywood

Afrormosia (Pericopsis Elata) Veneered On Hardwood Plywood

Afrormosia is a timber species found throughout Central and Western Africa. Predominantly down the Ivory Coast, Cameroon, Ghana and to a small extent in Nigeria. It can also be found from the Congo. But restrictions mean this cannot be imported directly into the EU from the Congo, from 5th September 2002.

Being a substitute for Teak veneer, Afrormosia can be found in boat / ship components and bespoke furniture. We’ve also known Afrormosia veneer to be used as wall panelling effectively.

Colour is normally a yellowish brown, through to a reddish brown.

Trade names associated with Pericopsis Elata.

Afromosia, African Teak, Anyeran, Anyesan, Asamela, Benin Satinwood, Satinwood, Yellow Satinwood.

Please Note : This veneer is listed under CITES (the Convention on International Trade in Endangered Species of Wild Fauna and Flora) as a protected timber species. So, it is subject to the international agreement between governments, to ensure that international trade in specimens of wild animals and plants does not threaten their survival. As such, this veneer may be subject to limited supply.

If you would like to know more about CITES, please click here

Please Note : We do not recommend / guarantee any veneered products used in any external / high moisture environment.

Please check further down the page, for more information on the different options available.

SKU SKU8104
Choosing The Quality of Veneer - (with commercial grade being the most common choice)
Choosing The Grade of Veneers - (with A/B being the most common)
The Slicing Method
Option To Choose A Different Jointing Method (With bookmatched as being the most common)
Finishes / Options - (Max Length 3050mm / Max Width 1240mm) - (MINIMUM ORDER IS 20 SHEETS)
Veneered Plywood Matrix 4.6mm 6mm 9mm 13mm 16mm 19mm
Plywood / Poplar Plywood (EN314-2, Class 1)            
2150mm x 1220mm          
2500mm x 1220mm
3050mm x 1530mm    
.            
Plywood (EN314-2, Class 3)            
2500mm x 1220mm
3050mm x 1530mm    
.            
Plywood Okoume (EN314-2, Class 3)            
2500mm x 1220mm        
.            
Manufacturer tolerance on sheet sizes : + / - 5mm. Thickness +/- 0.4mm / +/- 1mm            

Veneered Plywood Matrix
Board Size
Thickness
Instructions
Quantity
: *
: *
: *